PandaOS

For M5Stack Cardputer ADV only

Install in your browser

Factory install: resets internal settings, including saved Wi-Fi. Back up first.

The SD card is not formatted. PandaOS creates and maintains its own folders and files.

  1. Connect by USB with a data cable. Close other serial monitors.

  3. USB installation needs Web Serial and HTTPS (or localhost). Try desktop Chrome or Edge, or use the manual download.

What’s new

PandaOS 0.5.0

Standalone Cardputer ADV firmware with AI Chat, ten local games, Wi-Fi/BLE tools, LoRa/GNSS tools, voice recording, SD music playback, internet radio and local SD storage.

Factory-install package for ESP32-S3:

  • Flash address: 0x0
  • Flash size: 8 MB
  • Flash mode: DIO
  • Flash frequency: 80 MHz

LoRa peer reception and range testing remain pending.

Connection recovery

Turn the side switch OFF and disconnect USB. Hold G0, reconnect USB while holding it, then release G0. Select the new serial port and retry. Use the official ADV instructions below.

M5Stack Cardputer ADV